Designing a Software to Generate Digital Elevation Models Using Engineering Survey Data and Performing 3d Analysis by Mr. A.M.A.R. Geethalankara , Mr.K.L.P. Hemantha , Scientific Research Journal (Scirj), Volume III, Issue VII, July 2015 Edition

Scirj Volume III, Issue VII, July 2015 Edition
ISSN: 2201-2796

Designing a Software to Generate Digital Elevation Models Using Engineering Survey Data and Performing 3d Analysis

Mr. A.M.A.R. Geethalankara , Mr.K.L.P. Hemantha

Abstract: This research study was conducted for designing a new plug in software (DemCAD), which will generate DEMs using grid format Data such as Engineering Survey Data. This study was mainly focused on generating two Digital Elevation Models, those are Contour Model and Mesh Model, in that contour model gives 90% accurate result and Mesh Model gives almost perfect accurate result when comparing with Civil 3D and Matlab Software. DemCAD software contains set of programs which will allow user to input grid data, after it will perform a data analysis then finally it will output a script file automatically. Then user has to run this script file in AutoCAD 2D/3D Environment. This script contains set of commands which will be recorded in particular sequence and pattern, also to get complete DEM in AutoCAD Script file have to run on AutoCAD without interrupting.

Reference this Paper: Designing a Software to Generate Digital Elevation Models Using Engineering Survey Data and Performing 3d Analysis by Mr. A.M.A.R. Geethalankara , Mr.K.L.P. Hemantha published at: "Scientific Research Journal (Scirj), Volume III, Issue VII, July 2015 Edition, Page 1-6 ".

Search Terms: Digital Elevation Models, 3D Analysis, Script

[Read Research Paper] [Full Screen]